vastmobi.blogg.se - Hyundai sonata 2017 smart key holder

#Hyundai sonata 2017 smart key holder full

If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location.

Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.

Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.

As soon as you get inside your Hyundai, check that all the doors are closed.

How can a Hyundai Sonata’s key fob be reset? You’ll be able to tell if that was the problem after changing the battery. The issue could be anything as simple as a dead battery in your smart key. There could be a number of causes for your Hyundai key fob not to be recognized by your vehicle. Why does the Hyundai Sonata say that the key is not present?

on the left side of the glovebox when it is open. behind a panel right below the infotainment control knob or 3. Slots for Smart Keys: There are three places where these slots can be found: 1. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button. I think it would also benefit our Palisades!įix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Where is the Hyundai Sonata’s smart key holder located? If the fob battery is dead or if there is another problem, this will be a clue. Check the remote’s lock/unlock buttons as well. Have you verified the battery voltage? I’m not sure how a low battery will affect the starter. Additionally, if you blow the dome light fuse (which is obviously not your issue), you will need to do this. We’ll be happy to help.Simply insert the key fob (keychain end out) into the center console slot when the battery is low, and the start button should function normally. If you have any questions, give us a call. It may be something other than a dead battery. If your Hyundai Smart Key still isn’t working, schedule a service appointment. Video Tutorial Is Your Smart Key Still Not Working? A small red light above the unlock button should flash if everything was done correctly. Line up the release button peg with its corresponding holeĪnd you’re done! To test your Hyundai Smart Key, press any of the buttons.Replace the motherboard, barrier, and button-half of fob.Put the new battery in its bracket + side down.Use key to remove dead battery from its bracket.Set aside fob half with buttons and remove the barrier and motherboard.Face buttons downward (or they will fall out) and open the fob.Turn the key (like you’re unlocking a door) until the fob pops open.Insert key into groove between release button and key slot.Remove emergency key from bottom of fob.You will be touching a motherboard during this process, so it’s recommended that you also wear latex gloves to avoid accidental damage. A 5-pack of them usually costs around $3-$5. All you need is a replacement CR 2032 3V battery. Replacing your Hyundai key fob’s battery is straightforward. For more visual learners, you can skip to the bottom for the video tutorial. Here’s out step-by-step guide for changing a dead battery on a Hyundai Smart Key fob.

#Hyundai sonata 2017 smart key holder full

You’re walking out of the store with your hands full and you press the button on your key fob to unlock your Hyundai. Changing a Hyundai Smart Key Fob Battery: Step-by-Step Instructions & Video Guide